SAY NO TO RAGGING: Ragging is any disorderly conducct whether by words spoken or written or by an act which has the effect of teasing, treating or handling with rudenss to any student, indulging in rowady or undisciplined activities which cause or likely to cause annoyance, hardship or psychological harm or to raise fear or apprehension thereof in a fresher or a junior student and which has the effect of causing or generating a sense of shame or embarrassment so as to adversely affect psyche of a fresher or a junior student.

PUNISHMENT FOR RAGGING: 1. Immediate FIR and Police Action 2. Imprisonment upto Two Years 3. Fine upto Rs.2.5 Lakhs 4. Ternination from College

Hence, Students are advised to refrain themselves from any such Criminal Act

Accreditation of B.Tech - "Mechanical Engineering" and "Electronics & Communication Engineering" are further extended *by NBA till 30.06.2021.

||

Apply For B Tech, MBA, MCA, B. Pharm and D. Pharm for 2020-21 : Registration for Admission is Open

  • Notice
  • Enquiry
  • Apply Now
  • Labs and Infrastructure

    Labs and Infrastructure

    Facilities And Technical Support

    Adequate and well-equipped laboratories

    Well-equipped and well-maintained laboratories with adequate technical manpower are available. Equipments are kept in good condition. Technical staff is well trained for the maintenance of equipment.

    S.No. Name of the Lab Name of All Important Equipment
    1 Fluid Mechanics Laboratory Boundary layer apparatus
    Sudden contraction and Enlargement apparatus
    Bernoulli’s Theorem Apparatus
    Impact of Jet Apparatus
    Reynolds Apparatus
    Darcy’s Apparatus
    Pipe Friction Apparatus
    Metacentric Height Apparatus
    Calibration of Bend Meter
    Venturimeter
    Orifice Meter Apparatus
    Pitot Tube Setup
    2 Structural Analysis Laboratory Columns & Struts Apparatus
    Curved Member Apparatus
    Elastically Coupled Beam Apparatus
    Theorem Apparatus
    Redundant Joint Apparatus
    Elastic Properties of Deflected Apparatus
    Two hinged Arch Apparatus
    Unsymmetrical Bending Apparatus
    Three hinged Arch Apparatus
    3 Hydraulics and Hyd. Machines Lab Tilting Bed Apparatus
    Multi Speed Centrifugal Pump
    Francis Turbine
    Pelton Wheel
    4 Geo-informatics Lab Prismatic Compass
    Hilti Disto Meter
    Prismatic Compass
    Automatic Level
    Pocket Mirror Stereoscope
    Parallax Bar
    Hand GPS (Global Positioning System)
    Survey Umbrella
    Topo Map
    Automatic Level
    Electronic Theodolite
    Total Station
    Pocket Mirror Stereoscope
    DGPS Frequency (Differential Global Positioning System)
    5 Surveying Lab Total Station
    Electronic digital Theodolite
    Autolevel
    Substance Bar
    Prismatic Compass 100mm
    Surveyor Compass 100mm
    Vernier Theodolite
    Dumpy Level
    Measuring Chains 30 m
    Plane Table and its Accessories
    Engineers Precision Level
    IOP Level (Intraocular pressure)
    Measuring Tapes
    Planimeter Sliding Bar Type
    Ranging Rods 3m Steel
    Aluminium Levelling Staff
    Ghat Tracer
    Telescopic Alidade
    6 Non Destructive Lab Ultrasonic Concrete Test Apparatus
    Rebar Scanner
    Half Cell Potentiometer
    Rebound Hammer
    7 Concrete lab Ultrasonic Concrete Test Apparatus
    Density Basket(with full setup)
    AimilConsisto Meter
    Rebound Hammer
    Beam Mould (100x100x500) mm
    Digital Flexure Testing Machine
    8 Geo-technical Engineering Lab Consolidated test apparatus
    Shrinkage Limit Set
    Soil Hydro Meter
    Soil Consolidation Apparatus(3 Gang Digital)
    Unconfined Compression Test Apparatus
    Vane Shear Apparatus
    Density bottle (specific gravity)
    Tri Axial compression Test Apparatus
    Blade Type Auger
    Compaction Test Apparatus(light and heavy)
    Core Cutter
    Direct Shear Test Apparatus
    California Bearing Apparatus
    Sand Pouring Cylinder Apparatus
    Sieve Shaker
    Soil Hydrometer Range
    Speedy Moisture Meter
    Standard Penetration Test
    Static Cone
    Laboratory Permeability Apparatus
    Liquid Limit Device
    Oven
    Plastic Limit Set
    Techometer (Contact Type)
    Dessicator
    Hydrometer
    Pycnometer
    9 Transportation Engg Lab Impact Testing Machine
    Angeles Abrasion Testing machine
    Cleveland Flash Point Apparatus
    Redwood Viscometer
    Ring & Ball Apparatus
    Cylindrical Measures
    Density Basket
    Ductility Mould
    Ductility Testing Machine
    HS 32.45 Standard Test Sieves
    Length Gauge IS
    Length Gauge Thickness
    Standard Test Sieves
    Thermometer
    Universal Penetrometer
    Water Bath
    10 Building Material and Construction Lab Universal Testing Machine
    Compression Testing Machine
    Aggregate Crushing value
    Bulk Density Measurement
    Aggregate Crushing Value
    Aggregate Impact
    Tester
    Blaine Air Permeability Apparatus
    Vicat Needle Apparatus
    Le-chatelier Flask
    Water Bath
    Le-Chatelier Mould
    Hot Air Oven
    Cement Tensile Testing Machine
    Aggregate Crushing Value
    Flow Table
    Sieve Shaker
    Test Sieve
    Angeles Abrasion Testing machine
    Compaction Factor Test
    Vibrating Table
    Slump Test Apparatus
    Concrete Mixer
    Balance
    11 Structure Detailing Lab & Building Planning and Drawing Lab Drawing table -70
    12 Environmental Engineering Lab Waterproof Turbidity Meter
    NSW Vertical Autoclave
    Incubator BOD
    Thermo Scientific Spectrophotometer
    Conductivity Meter
    CyberscanPh Meter
    Digital Electronic Balance
    13 Additional facilities in laboratories Power Rail Track
    RAM Structural System
    GEOPAK Civil Engineering Suite
    StromCAD
    AECOsim Building Designer
    SACS Marine Enterprise

    Utilization of Project Laboratories

    2018-19

    Hydraulics and Machine Laboratory:

    1. Behaviour of hydraulic jump on different bed roughness under Mr. Raj Vikram Singh

    Geotechnical Engineering Laboratory:

    1. Soil stabilization using admixtures under Mr. Tushar Gupta 2016-17
    2. Stabilization of black cotton soil using rice husk ash and lime under Mr. Waqar A.Khan 2016-17
    3. Soil stabilization using marble dust under Mr. Waqar A.Khan 2016-17
    4. Stabilization of black cotton soil using stone dust under Mr. Waqar A.Khan 2016-17
    5. Non convertional method for soil improvement under Mr. Bhanu
    6. Soil Stabilization using Lime under Mr. PiyushPandey 2017-18
    7. Effect of marble dust on strength and durability of rice husk ash stabilised expensive soil under Mr. Tushar Gupta 2018-19
    8. Effect of stone powder and lime on strength component CBR properties of fine soil under Mr. Tushar Gupta 2018-19
    9. Soil stabilization using lime and fly ash under M r. Raj vikram singh

    Transportation Engineering Lab:

    1. Use of plastic waste in road construction under Mr. Tushar Gupta 2017-18

    Building Material and Construction Laboratory:

    1. Properties of concrete on partial replacement of concrete with marble dust under guidance of Ms. Meenu kakra 2016-17
    2. Effect on strength of concrete made using recycled coarse aggregate Ms. Meenu kakra 2017-18
    3. Concrete cube testing with different admixtures under Mr. PiyushPandey 2017-18
    4. Durability of concrete made from blended cement under Mrs. Meenukalra 2018-19
    5. RCC cube test with different grades and admixture under Parveen Berwal 2018-19
    6. Pervious concrete replacement with fly ash and silica under Mr. vinodth 2018-19
    7. Replacement of cement with fly ash and sand with quarry dust in concrete under Ms. Richa Srivastava 2018-19

    Software in CAD Lab

    STAAD-Pro.:

    1. Design and analysis of residential building using Staad-Pro under Mr.Shailender singh 2016-17
    2. Design and Analysis of a Multi-storey Buildingusing Staad-Pro under Mr.Shailender singh 2017-18
    3. Design and analysis of residential building using Staad-Pro under Dr. Rajni 2017-18
    4. Design and Analysis of a Commercial Buildingusing Staad-Pro under Mr.Shailender singh 2017-18

    Other

    Slope/W Geoslope Software

    1. Slope stability analysis under guidance of Mr. WaqarA.Khan 2016-17
    2. Slope stability unser guidance of Dr.Rajni 2017-18

    Salt Mod/Salt Calc

    1. Study of crop root zone parameter due to seepage of canal water under Mr. S.K Parmar 2016-17
    2. Study on effect of irrigation water on salinity of adjoining area under Mr. S.K Parmar 2018-19
    3. Study on effect of irrigation water on salinity of root zone of crop under Mr. S.K Parmar 2018-19

    Abaqus 6.14

    1. Numerical analysis of Pile group under Dr.RajniSaggu 2016-17
    2. Analysis of drag load on piles and remedial measure under Dr.RajniSaggu 2018-19

    QGIS

    Analysis and mapping of ground water quality parameter of Gorakhpur city under Mr. BhanuMagotra

    Environmental Engineering Laboratory

    Ground water quality assessment of gautam Buddha nagar district using multivariate statistical techniques under Ms Swati Bora 2018-19

    Project lab

    A separate project lab is established to carry out various B.Tech projects.

    Safety measures in laboratories

    Fluid Mechanics Lab

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available on each floor in case of any minor injury due to equipment/ accessories handling.
    3. The opening and closing of water inlet valves are generally taken care by the laboratory staff.
    4. Initial demonstration is given to students to handle the equipment and accessories with required safety announcements.
    5. Students perform the experiment under the supervision of faculty and staff.

    Structural Analysis Lab

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available on a floor in case of any minor injury due to equipment/ accessories handling.
    3. Initial demonstration is given to students to handle the equipment and accessories with required safety announcements.
    4. Students perform the experiment under the supervision of faculty and staff.

    Hydraulics and Hyd. Machines Lab

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available on a floor in case of any minor injury due to equipment/ accessories handling.
    3. The opening and closing of water inlet valves is generally taken care by the laboratory staff.
    4. Initial demonstration is given to students to handle the equipment and accessories with required safety announcements.
    5. Students perform the experiment under the supervision of faculty and staff.
    6. Project students are generally accompanied with supervisors while conducting experiments in the presence of laboratory staff.

    Surveying Lab

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available on a floor in case of any minor injury due to equipment/ accessories handling or experimentation.
    3. Initial demonstration is given to students to handle the equipment and accessories with required safety announcements.
    4. Students perform the experiment under the supervision of faculty and staff.
    5. Students are encouraged to use Safety Helmet, Umbrellas and gum boots wherever required.
    6. Students are advised to carry water bottles and keep themselves hydrated while working in open. Water arrangement is made in case of survey camps.

    Geo-informatics Lab

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available on a floor in case of any minor injury due to equipment/ accessories handling or experimentation.
    3. Initial demonstration is given to students to handle the equipment and accessories with required safety announcements.
    4. Students perform the experiment under the supervision of faculty and staff.
    5. Students are encouraged to use Safety Helmet, Umbrellas and gum boots wherever required.
    6. Students are advised to carry water bottles and keep themselves hydrated while working in ope

    Non- Destructive Laboratory & Concrete Laboratory

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available on a floor in case of any minor injury due to material/ equipment/ accessories handling.
    3. Initial demonstration is given to students to handle the equipment and accessories with required safety announcements.
    4. Students perform the experiment under the supervision of faculty and staff.
    5. Students are encouraged to use hand gloves and aprons while handling cementitious and fibre/additive materials
    6. Project students are generally accompanied with supervisors and faculty incharge of lab while casting and testing of specimens in the presence of laboratory staff.

    Geo-technical Engineering Laboratory

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available in the lab in case of any minor injury due to material/ equipment/ accessories handling.
    3. Initial demonstration is given to students to handle the equipment and accessories with required safety announcements.
    4. Students perform the experiment under the supervision of faculty and staff.
    5. Incase of SPT test, four additional staff are required for shifting of equipment to site and handle the heavy weights.
    6. Students are encouraged to use hand gloves, helmets, aprons and gum boots especially on site while doing SPT test.
    7. Special care is taken while performing the relative density test on the vibrating table with heavy weight.
    8. Project students are generally accompanied with supervisors and faculty incharge of lab while conducting experiments in the presence of laboratory staff.

    Transportation Engineering Lab

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available on a floor in case of any burn injury due to heated bituminous material/ equipment/ accessories handling.
    3. Initial demonstration is given to students to handle the equipment and accessories with required safety announcements.
    4. Students perform the experiment under the supervision of faculty and staff.
    5. Students are encouraged to use hand gloves and aprons while handling bituminous and aggregate materials.
    6. Special advice is given to students while performing flash and fire point test on bitumen and aggregate impact test.

    Building Material and Construction Laboratory

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available on a floor in case of any minor injury due to material/ equipment/ accessories handling.
    3. Initial demonstration is given to students to handle the equipment and accessories with required safety announcements.
    4. Students perform the experiment under the supervision of faculty and staff.
    5. Students are encouraged to use hand gloves and aprons while handling cementitious and fibre/additive materials
    6. Project students are generally accompanied with supervisors and faculty incharge of lab while casting and testing of specimens in the presence of laboratory staff.

    CAD Lab-1& CAD Lab-2

    1. All systems are equipped with UPS to save data.
    2. List of Do’s and Don’ts is displayed on laboratory notice board.
    3. All systems carry the detail of the softwares installed.
    4. System is marked in case it is under maintenance.

    Structure Detailing Lab

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available on a floor in case of any minor injury due to material/ equipment/ accessories handling.
    3. Initial demonstration is given to students to handle the equipment and accessories with required safety announcements.
    4. Students perform the experiment under the supervision of faculty and staff.
    5. Students are encouraged to use hand gloves and aprons while handling steel bars and winding wire.

    Building Planning and Drawing Lab

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available on a floor in case of any minor injury due to material/ equipment/ accessories handling.

    Environmental Engineering Lab

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available in the lab in case of any chemical burn injury or broken glassware.
    3. Initial demonstration is given to students to handle the equipment, glassware and chemicals with required safety announcements.
    4. Students perform the experiment under the supervision of faculty and staff.
    5. Students are encouraged to use lab coats and/or aprons while handling chemicals.

    Project Laboratory

    1. List of Do’s and Don’ts is displayed on laboratory notice board.
    2. First Aid box is available in the lab in case of any chemical burn injury or broken glassware.
    3. Initial demonstration is given to students to handle the equipment, glassware and chemicals with required safety announcements.
    4. Students perform the experiment under the supervision of faculty and staff.
    5. Students are encouraged to use lab coats and/or aprons while handling chemicals.

    Academics

    Updates

    Recruiters

    • Indian Navy TCS Infosys Interglobe Technologies Bhilwara Infotech Ltd. PNB Housing
    • Chegg India Thots Labs Naukri.com Jet Airways Radical Minds Technologies Tanisha Systems
    • TransWeb Educational Services Pvt Ltd Shimuk Enterprises Pvt Ltd Amazon Juspay Pioneer-e-Solutions Namekart
    • Garg Group edWisor Classplus RGF Trishul Realcon Pvt. Ltd. Multiplier Solutions
    • Ebizon Netinfo Pvt Ltd WSP Consultants India Pvt. Ltd Vedicsoft Solutions India Pvt. Ltd. Novelvox Real Time Data Services Sopra Steria
    • JINDAL BUILDSYS LTD.  Polestar Solutions & Services Ind. Pvt Ltd Premier Edge Solutions pvt. ltd GiGlue Music Private Limited WhizChip Design Technologies Pvt Ltd Kriti Digitech Pvt Ltd
    • Fedex Success Mantra Maharani Innovative Paints Pvt. Ltd.