" "

SAY NO TO RAGGING: Ragging is any disorderly conducct whether by words spoken or written or by an act which has the effect of teasing, treating or handling with rudenss to any student, indulging in rowady or undisciplined activities which cause or likely to cause annoyance, hardship or psychological harm or to raise fear or apprehension thereof in a fresher or a junior student and which has the effect of causing or generating a sense of shame or embarrassment so as to adversely affect psyche of a fresher or a junior student.

PUNISHMENT FOR RAGGING: 1. Immediate FIR and Police Action 2. Imprisonment upto Two Years 3. Fine upto Rs.2.5 Lakhs 4. Ternination from College

Hence, Students are advised to refrain themselves from any such Criminal Act

MOUs, Funded Research, Consultancy and Patents

  • Academics
  • Department
  • ME
  • Research and Development
  • MOUs, Funded Research, Consultancy and Patents

MOUs, Funded Research, Consultancy and Patents

Research Paper 2017-18

S. No Name of Faculty Research Paper Title Name of Journal and Year of Publication
1 Sanjay Kumar, Abid Haleem and Sushil Assessing innovativeness of manufacturing firms using an intuitionistic fuzzy based MCDM framework Benchmarking: an
International Journal, (Accepted)
2 Ashish Dewangan, Ashok Kumar Yadav and Ashis Mallick Current scenario of biodiesel development in India: prospects and challenges Energy Sources, Part A: Recovery,
Utilization, and Environmental Effects (Accepted)
3 V.S. Gupta, D.B. Singh, R.K. Mishra and G.N. Tiwari Development of characteristic equations for PVT-CPC integrated self-sustainable active solar distillation system Desalination, Elsevier, Vol. 445, pp. 266-279.
4 Ashok Kumar Yadav, Ashish Dewangan and Ashis Mallick Synthesis and Stability Study of Biodiesel from Kachnar Seed Oil Journal of Energy Engineering. American Society of Civil Engineers. Vol. 144, Issue 5, pp. 04018053 (1-7)
5 Ashok Kumar Yadav, Ashish Dewangan and  Ashis Mallick Effect of n- Butanol and Diethyl Ether on Performance and Emission Characteristics of a Diesel Engine Fuelled with Diesel-Pongamia Biodiesel Blend Journal of Energy Engineering. American Society of Civil Engineers. Vol. 144, Issue 6, pp. 04018062(1-6)
6 D. B. Singh, Navneet Kumar, Sanjay Kumar, Vijay Kumar Dwivedi, Jeetendra Kumar Yadav, and G. N. Tiwari Enhancement in Exergoeconomic and Enviroeconomic Parameters for Single Slope Solar Still by Incorporating N Identical Partially Covered Photovoltaic Collectors Journal of Solar Energy Engineering Including Wind Energy and Building Energy Conservation, Vol. 140, Issue 5, pp. 05100201- 051002118
7 D. B. Singh Improving the performance of single slope solar still by including N identical PVT collectors Applied Thermal Engineering, Elsevier, Vol. 131, pp. 167–179
8 D. B. Singh Energy metrics analysis of N identical evacuated tubular collectors integrated single slope solar still Energy, Elsevier, Vol. 148, pp. 546-560
9 D. B. Singh, I. M. Al-Helal Energy metrics analysis of  N identical evacuated tubular collectors integrated double slope solar still Desalination, Elsevier, Vol. 432, pp. 10-22
10 Ashok Kumar Singh, D.B. Singh, Navneet Kumar Ashis Mallick Energy matrices and efficiency analyses of solar distiller units: A review Solar Energy, Elsevier, Vol. 173, pp. 53-75
11 P.K. Arora, S.C. Srivastava, Harish Kumar Determination of crack growth direction for multiple offset edge cracks of a finite plate Engineering Solid Mechanics, Volume 5 Issue 3 pp. 185-198 , 2017
12 Harish Kumar, Moona, Girija, P. K. Arora, , Abid Haleem, Jasveer Singh, Rajesh Kumar and Anil Kumar Monte carlo method for evaluation of uncertainty of measurement in brinell hardness scale Indian Journal of Pure & Applied Physics Vol. 55, June 2017, pp. 445-453
13 Amit Kumar Srivastava,  P. K. Arora,  Sharad Chandra Srivastava,  Harish Kumar and  M. K. Lohumi. Determination of Fracture Parameters for Multiple Cracks of Laminated Composite Finite Plate.  Applied Composite Materials
pp 1–18, 2017
14 D.B. Singh and G.N. Tiwari Energy, exergy and cost analyses of N identical evacuated tubular
collectors integrated basin type solar stills: A comparative study
Solar Energy 155 (2017) 829–846
15 Desh Bandhu Singh Exergoeconomic and enviroeconomic analyses of N identical photovoltaic thermal integrated double slope solar still Int. J. Exergy, Vol. 23, No. 4, 2017
16 Desh B Singh and Gopal N Tiwari Analytical Characteristic Equation of N Identical Evacuated Tubular Collectors Integrated Double Slope Solar Still Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation. ASME, Vol. 135, issue 5, pp. 051003(1-11)
17 Ashish Dewangan and Ashis, Mallick Ultrasonic-assisted production of biodiesel from Manilkara Zapota (L.) seed oil. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. Taylor & Francis. Vol 39 (15), pp. 1594- 1601
18 Ashish Dewangan  and A. K. Yadav Wax deposition during production of waxy crude oil and its remediation.   Petroleum Science & Technology.  Taylor and Francis. Vol. 35(18), pp. 1831- 1838

Publications in International/National Conferences

S. No Name of Faculty Research Paper Title Name of Conferences
1 Ashok Kumar Singh, D. B. Singh, Navneet Kumar, V.K. Dwivedi, Gajendra Singh and Rajeev Kumar Basin type solar still integrated with PVT collectors- A comprehensive review, Trends and Recent Advances in Civil Engineering (TRACE-2018) held from 23rd-24th August, 2018. (An International Conference)
2 D. B. Singh, N. Kumar and J. K. Yadav Sensitivity analysis of N identical partially covered (50%) PVT flat plate collectors integrated single slope solar distiller unit International conference on advances in business and engineering for sustainability (ABES) 2018 held on 27-28th March 2018 at ABES Engineering College Ghaziabad
3 A. K. Singh, S. Chattopadhayaya, D. B. Singh and N Kumar Performance study for active solar stills based on energy metric: A short reviews International conference on advances in business and engineering for sustainability (ABES) 2018 held on 27-28th March 2018 at ABES Engineering College Ghaziabad
4 Navneet Kumar, Desh Bandhu Singh, D. R. Kaushal, Sanjeev Kumar Sharma, Gajendra Singh and Ashok Kumar Singh Solid-liquid flow at higher concentration through bend International Conference on Trends and Recent Advances in Civil Engineering TRACE-2018, at: Amity University, Noida
5 Navneet Kumar, Desh Bandhu Singh and Sanjeev Kumar Sharma CFD Analysis of Two-phase Flow Characteristics in Horizontal Pipeline International Conference On Computational and Experimental Methods in Mechanical Engineering at G. L. Bajaj Institute of Technology and Management, Greater Noida
  Ashish Dewangan, Ashis Mallick and A. K. Yadav Properties and Characterization of
Conventional and Alternative Aviation Fuels: A Review.
International Conference of
Advance Research and Innovation (ICARI- 2018), DTU New Delhi.
  Ashish Dewangan and Ashis Mallick CFD Analysis of Heat Transfer in Helical Coil Heat Exchanger. International Conference on Computational and Experimental Methods in Mechanical Engineering. GLBITM, Greater Noida

Research Paper 2016-17

Publications in International/National Journal

S. No Name of Faculty Research Paper Title Name of Journal and Year of Publication
1 Abuzeinab, A., Arif, M. and Qadri, M.A. Barriers to MNEs green business models in the UK construction sector: An ISM analysis 2017, Journal of Cleaner Production, Vol. 160, 27-3.(Elsevier, SCI, Impact Factor 6.207)
2 Abuzeinab, A., Arif, M. and Qadri, M.A. Green business models in the construction sector: An analysis of outcomes and benefits 2017, accepted for publication in Construction Innovation: Information, Process, Management (CI-07-2016-0041.R2).
3 Singh, D.B. and Tiwari, G.N Exergoeconomic, enviroeconomic and productivity analyses of basin type solar stills by incorporating N identical PVT compound parabolic concentrator collectors: A comparative study 2017),  Energy Conversion and Management, Vol. 135, pp. 129–147 (Elsevier, SCI, Impact Factor 4.8)
4 Singh, D.B. and Tiwari, G.N. Performance analysis of basin type solar stills integrated with N identical photovoltaic thermal (PVT) compound parabolic concentrator (CPC) collectors: A comparative study 2017, Solar Energy, Vol. 142, pp. 144–158 (Elsevier, Impact Factor 3.685)
5 Singh, D.B. and Tiwari, G.N. Enhancement in energy metrics of double slope solar still by incorporating N identical PVT collectors 2017,  Solar Energy, Vol. 143, pp. 142–161 (Elsevier, Impact Factor 3.685)
6 Sandeep, Sudhir Kumar and V.K.Dwivedi Evaluating thermal performance of a basin type modified active solar still Desalination and Water Treatment, 72 (2017) 100–111 (Taylor & Francis, Impact Factor: 1.272)
7 Rohit Tripathi, G.N. Tripathiand V.K.Dwivedi Energy matrices evaluation and exergoeconomic analysis of series connected N partially covered (glass to glass PV module) concentratedphotovoltaic thermal collector: At constant flow rate mode Energy Conversion and Management 145 (2017) 353–370 (Elsevier, Impact Factor: 4.8]

Publications in International/National Conferences

S. No Name of Faculty Research Paper Title Name of Conferences
1 P K Arora, Manohar Singh and Harish Kumar Optimization of Turning Parameters Using Taguchi Method India International Science Festival, CSIR-NPL New Delhi, 8-11 Dec 2016
2 P K Arora, S.A.Khan and Harish Kumar Designing of Virtual Manufacturing System: A Review India International Science Festival, CSIR-NPL New Delhi, 8-11 Dec 2016, IIT Delhi
3 Singh D. B. and Yadav J. K. Energy and exergy analyses of double slope solar still incorporated with N identical flat plate collectors National Conference on Renewable Energy Sources for Sustainable Climate, SOLARIS, IIT Delhi 7-9 February, 2017
4 Yadav J. K., Singh D. B., Dubey A. and Singh D. Energy and exergy analyses of single slope solar still incorporated with two identical PVT collectors: An experimental study National Conference on Renewable Energy Sources for Sustainable Climate, SOLARIS, IIT Delhi 7-9 February, 2017
5 Rohit Tripathi, G.N.Tripathi and V.K.Dwivedi Overall Energy and Exergy Performance of Partially Covered N-Photovoltaic Thermal (PVT)-compound Parabolic Concentrator (CPC) Collectors Connected in Series 1st IEEE International Conference on Power Electronics. Intelligent Control and Energy Systems (ICPEICES-2016)
6 Sumit Tiwari, V.K.Dwivedi, Rohit Tripathi and  G.N.Tripathi Energy Analysis of Photovoltaic-Thermal (PVT) Greenhouse Under Forced Mode without Load Condition. 2nd international conference on Innovative Applications of Computational Intelligence on Power, Energy and Controls with their Impact on Humanity (CIPECH-16) in IEEE international conference, November 18-19, 2016,  KIET Ghaziabad
7 Sudhanshu Sharma and V.K. Dwivedi Performance Analysis of Vapour Compression Refrigeration system with Different Expansion Devices 2nd  International conference CETCME-2017 during February 18-19th 2017 at NIET Greater Noida
8 V. K. Dwivedi Effect of PV area on energy and exergy of single slope solar still    incorporated with N identical flat plate collectors National Conference on Renewable Energy Sources for Sustainable Climate held in IIT BHU Varanasi, February 07-09, 2017 (SOLARIS 2017).
9 V. K. Dwivedi Effect of PV area on the performance of flat plate air collector integrated GSD National Conference on Renewable Energy Sources for Sustainable Climate held in IIT BHU Varanasi, February 07-09, 2017 (SOLARIS 2017).

Research Paper 2015-16

Publications in International/National Journal

S. No Name of Faculty Research Paper Title Name of Journal and Year of Publication
1 Rohit Tripathi, G.N.Tripathi and V.K.Dwivedi Overall energy, exergy and carbon credit analysis of N partially covered Photovoltaic Thermal (PVT) concentrating collector connected in series. Solar Energy 136 (2016) 260–267. (Elsevier, Impact Factor 3.685)
2 Singh, D.B. and Tiwari, G.N. Effect of energy matrices on life cycle cost analysis of partially covered photovoltaic compound parabolic concentrator collector active solar distillation system, Desalination, Vol. 397, pp. 75–91, Elsevier, (2016) 91 (Elsevier, Impact Factor 4.4)
3 Singh, D.B., Yadav, J.K. , Dwivedi, V.K., Kumar , S.,   Tiwari, G.N. and  Al-Helal , I.M., Experimental studies of active solar still integrated with two hybrid PVT collectors Solar Energy, Vol. 130, pp. 207–223, Elsevier, (2016) (Elsevier,  Impact Factor 3.685)
4 Singh, D.B., Tiwari, G.N., Al-Helal , I.M., Dwivedi, V.K and Yadav, J.K, Effect of energy matrices on life cycle cost analysis of passive solar stills Solar Energy, Vol. 134, pp.9–22, Elsevier, (2016) (Elsevier, Impact Factor 3.685)
5 Tiwari, G.N., Yadav, J.K., Singh, D.B., Al-Helal, I.M. and Abdel-Ghany, A.M., Exergoeconomic and enviroeconomic analyses of partially covered photovoltaic flat plate collector active solar distillation system Desalination, Vol. 367, pp.186–196, Elsevier, (2015) (Elsevier,  Impact Factor 4.4)
6 V. Sharma, A.R. Dixit, and M.A. Qadri Empirical assessment of the causal relationships among lean criteria using DEMATEL method Benchmarking: an International Journal, Vol. 23, issue 7, pp.1834-1859, 2016 (Emerald)
7 V. Sharma, A.R. Dixit, and M.A. Qadri Modeling lean implementation for manufacturing sector Journal of Modeling and Management, Vol. 11, Issue 2, pp. 405-426, 2016 (Emerald)
8 Amit K. Srivastava, P.K. Arora and Harish Kumar Numerical and experiment fracture modeling for multiple cracks of a finite aluminum plate International Journal of Mechanical Sciences 110, pp. 1-13, 2016
9 Harish Kumar, Chitra Sharma, P.K. Arora, Girija Moona and Anil Kumar Development and metrological characterization of a precision force transducer for static force measurement related applications Measurement 88 March 2016
10 Arora, P K, Haleem, Abid and Singh, M K. Design of a Production System Using Simulating Annealing Technique Productivity, Vol. 56, No.4, pp. 362-367, 2016
11 V. Sharma, A.R. Dixit, M.A. Qadri and S. Kumar An Interpretive hierarchical model for lean implementation in machine tool sector International Journal of Productivity and Quality Management, Vol. 15, No. 3, pp-381-.406, 2015. (Inderscience)
12 V. Sharma, A.R. Dixit, and M.A. Qadri Impact of lean practices on performance measures in context to Indian machine tool industry Journal of manufacturing and technology management, Vol. 26, issue 8,  pp. 1218-1242, 2015 (Emerald)
13 Kalyan Kumar Singh, Saurabh Singh, and Anil Kumar Shrivastava Study of Tribological Behavior of Silicon Carbide Based Aluminum Metal Matrix Composites under Dry and Lubricated Environment Advances in Materials Science and Engineering Volume 2016, Article ID 3813412, 11 pages (Hindawi Publishing Corporation)
14 H. Kumar, C. Sharma, A. Kumar, Arora PK, S. Kumar Design, development and metrological characterization of a low capacity precision industrial force transducer. ISA Trans. 2015 Sep; 58:659-66.
15 Harish Kumar , Mohit Kaushik , Pardeep and Pawan Kumar Arora Investigations on metrological characterization of elliptical shaped force transducers for precision force measurement Engineering Solid Mechanics 3 (2015) 263-273
16 Sandeep, Sudhir Kumar, V.K. Dwivedi Experimental study on modified single slope single basin active solar still Desalination
Volume 367, 1 July 2015, Pages 69-75

Publications in International/National Conferences

S. No Name of Faculty Research Paper Title Name of Conferences
1 Kalyan Kumar Singh , Saurabh Singh and Anil Kumar Shrivastava Comparison of Wear and Friction Behavior of Aluminum Matrix Alloy (Al 7075) and Silicon Carbide based Aluminum Metal Matrix Composite under Dry Condition at Different Sliding Distance International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016)
2 V.K. Dwivedi and Manoj Gaur Performance analysis of a single basin double slope passive solar still. National Conference on “Energy and Environment: Threat and Remedies in Rustamji Institute of Technology, BSF Academy, Tekanpur Gwaliar (MP) held on May 5-6, 2016
3 V.K.Dwivedi, Prabhakar Tiwari and Sumit Tiwari Importance of phase change material (PCM) in Solar Thermal Applications: A Review. International Conference on Emerging Trends in Electrical, Electronics & Sustainable Energy Systems (ICETEESES-16), KNIT, Sultanpur, February 11-12, 2016 

Research Paper 2014-15

Publications in International/National Journal

S. No Name of Faculty Research Paper Title Name of Journal and Year of Publication
1 M. K. Lohumi, Aas Mohammad and I. A. Khan A computerized loop based approach for identification of isomorphism and type of mobility in planar kinematic chains Sadhana, Indian Academy of Sciences, April 2015, Volume 40, Issue 2, pp 335-350. (Springer)
2 S. Sharma, V. K. Dwivedi and S. N. Pandit A review of thermoelectric devices for cooling applications International Journal of Green Energy, Vol.11, pp. 899-909, March 2014.
3 S. Sharma, V. K. Dwivedi and S. N. Pandit Exergy analysis of single stage and multi stage thermoelectric coolers International Journal of Energy Research, Vol.28, pp. 213-222, 2014. 
4 S. Sharma, V. K. Dwivedi and S. N. Pandit Thermoeconomic analysis of multi stage thermoelectric cooler International Journal of Thermal and Environmental Engineering, Vol.08 (02), pp. 77-82, 2014.
5 S. Luthra, M. A. Qadri, D. Garg and A. Haleem Identification of critical success factors to achieve high green supply chain management performances in Indian automobile industry International Journal of Logistic System and Management, Vol. 18, No. 2, pp. 170-199, 2014.  (Inderscience)
6 V. Sharma, A.R. Dixit and M. A. Qadri Analysis of barriers to lean implementation in machine tool sector International Journal of Lean Thinking, Vol. 5, No. 1, pp. 1-25, 2014.
7 P.K.Arora, A.Haleem, M.K. Singh, H.Kumar and M.Kaushik Design of production System Using Genetic Algorithm Procedia Technology, Vol.14, pp.390-396, 2014. (Elsevier)
8 A.K. Sethi, and V.K. Dwivedi Carbon credits earned from a double slope active solar still under forced circulation mode International Journal Renewable Energy Technology, Vol. 5, No. 4, pp. 363-371, 2014.
9 A.K. Sethi, and V.K. Dwivedi Development and life cycle analysis of double slope active solar still with flat plate collector Journal of Engineering Science and Technology Review 7.1, pp. 164-169, 2014.
10 Singh, B., Singh, A. and Yadav, R. C. Adoption of Advance Manufacturing Technologies in Small Manufacturing Sectors of India : An integrated Planning Model International Journal of Mechanical and Manufacturing Technology, Vol. 3, Issue 1, pp. 196-206, 2014.

Publications in International/National Conferences

S. No Name of Faculty Research Paper Title Name of Conferences
1 G.N. Tiwari, Sumit Tiwari, V. K. Dwivedi, Sanjeev Sharma and Vineet Tiwari Effect of Water Flow on PV Module: A Case Study", IEEE International Conference on Energy, Economics and Environment (ICEEE2015). Galgotia College of Engineering and Technology, Greater Noida, 27-28 March, 2015.

Academics

Updates

Recruiters

  • Indian Navy TCS Infosys Wipro Technologies Interglobe Technologies Hero Motocorp
  • Bhilwara Infotech Ltd. Ashok Layland Optra Automation Pvt. Ltd. Perfect Generators Chegg India IP Neeti
  • Thots Labs Naukri.com Jet Airways Radical Minds Technologies Tanisha Systems Future Supply Chain Solutions Ltd
  • Ingenious e-Brain Solutions TransWeb Educational Services Pvt Ltd Research Nester Amazon Shahi Exports Pvt. Ltd. Emerson Automation Solutions
  • Juspay Pioneer-e-Solutions Namekart Eastman Mettcast Ltd. Dhampur Sugar Mills Ltd Jaipur Mahua Tollway Pvt. Ltd.
  • edWisor Classplus RGF Trishul Realcon Pvt. Ltd. Multiplier Solutions HSBC Software Development (India) Pvt. Ltd.
  • Ebizon Netinfo Pvt Ltd Sharda Motor WSP Consultants India Pvt. Ltd AKGEM Impex Pvt. Ltd. Grenovators Motor Work Pvt Ltd  Vedicsoft Solutions India Pvt. Ltd.
  • Novelvox Al Futtaim Carillion (Dubai, UAE) - Emrill Real Time Data Services Zep Infratech Ltd Paharpur Sopra Steria
  • JINDAL BUILDSYS LTD.  Oriental Structural Engineers Pvt Ltd Polestar Solutions & Services Ind. Pvt Ltd Trident Techlabs Pvt Ltd Industry Buying MPS Ltd.
  • Premier Edge Solutions pvt. ltd GiGlue Music Private Limited TPS Infrastructure Ltd. Vikas Group CNH Industrial (I) Pvt. Ltd. WhizChip Design Technologies Pvt Ltd
  • Kriti Digitech Pvt Ltd Cognizant Kriti Group Fedex Success Mantra Imperial Society
  • Emtex Manufacturing Mahindra & Mahindra Ltd. PPAP Automotive Limited Cube Highways