SAY NO TO RAGGING: Ragging is any disorderly conducct whether by words spoken or written or by an act which has the effect of teasing, treating or handling with rudenss to any student, indulging in rowady or undisciplined activities which cause or likely to cause annoyance, hardship or psychological harm or to raise fear or apprehension thereof in a fresher or a junior student and which has the effect of causing or generating a sense of shame or embarrassment so as to adversely affect psyche of a fresher or a junior student.

PUNISHMENT FOR RAGGING: 1. Immediate FIR and Police Action 2. Imprisonment upto Two Years 3. Fine upto Rs.2.5 Lakhs 4. Ternination from College

Hence, Students are advised to refrain themselves from any such Criminal Act

NEP 2020: Churning the wheels of India’s transformation.

Admissions (2023-24) are now open. Please visit only the campus (D-block, Auditorium) at Galgotias College of Engg & Technology, Plot # 1, Knowledge Park – II, Greater Noida. There is NO other branch / office of this college in any other location.

||

For Admission related queries, do contact at : - +91-7303382061 / +91-7303382063 / 0120-4513800

||

Accreditations of B Tech - Mechanical Engineering and B Tech - Electronics and Communication Engineering are further extended by NBA till 30.06. 2024 (Academic Session : 2023-24)

||

Apply For B Tech, MBA, MCA, B. Pharm and D. Pharm for 2022-23 : Registration for Admission is Open

close

Publications

Publications

List of Publications in Journals

Name of Author Title of Paper Type Category Name of Journal Vol(issue), pp Publication Date /Year
V. K. Dwivedi Overall energy, exergy and carbon credit analysis of N partially covered Photovoltaic Thermal (PVT) concentrating collector connected in series. International Journal Solar Energy ,Elsevier 136, pp 260–267 2016
M. A. Qadri Empirical assessment of the causal relationships among lean criteria using DEMATEL method International Journal Benchmarking: an International Journal, Emerald 23 ( 7), pp: 1834-1859 2016
M. A. Qadri Modeling lean implementation for manufacturing sector International Journal Journal of Modeling and Management, Emerald   11 (2), pp: 405-426 2016
M. A. Qadri Impact of lean practices on performance measures in context to Indian machine tool industry International Journal   Journal of manufacturing and technology management 26 (8), pp: 1218-1242 2016
M. A. Qadri An Interpretive hierarchical model for lean implementation in machine tool sector International Journal International Journal of Productivity and Quality 15 (3), pp: 381-406 2016
P. K. Arora Numerical and experiment fracture modeling for multiple cracks of a finite aluminum plate International Journal International Journal of Mechanical Sciences 110  pp:1-13(2016) 2016
P. K. Arora Development and metrological characterization of a precision force transducer for static force measurement related applications International Journal Measurement 88, pp: 77–86 2016
P. K. Arora Design of a Production System Using Simulating Annealing Technique International Journal Productivity 56 (4): pp: 362-367 2016
D. B. Singh Effect of energy matrices on life cycle cost analysis of partially covered photovoltaic compound parabolic concentrator collector active solar distillation system International Journal Desalination, Elsevier 397, pp: 75-91 2016
D. B. Singh Experimental studies of active solar still integrated with two hybrid PVT collectors, Solar Energy, Elsevier International Journal Solar Energy, Elsevier 130, pp: 207-223 2016
J.K. Yadav, D.B. Singh et al. Exergoeconomic and enviroeconomic analyses of partially covered photovoltaic flat plate collector active solar distillation system International Journal Desalination 367, pp: 186-196 2016
D. B. Singh Effect of energy matrices on life cycle cost analysis of passive solar stills International Journal Solar Energy, Elsevier 134, pp: 9-22 2016
S. Kumar, et al. Analysis of Two-stage Thermoelectric Cooler with Genetic Algorithm International Journal Advance Research and Innovation 4 (1), pp: 24-28 2016
A. K. Shrivastava Study of Tribological Behavior of Silicon Carbide Based Aluminum Metal Matrix Composites under Dry and Lubricated Environment International Journal Advances in Materials Science and Engineering,Hindaw iPublishing Corporation   2016
D. B. Singh Exergoeconomic, enviroeconomic and productivity analyses of basin type solar stills by incorporating N identical PVT compound parabolic concentrator collectors: A comparative study International Journal Energy Conversion and Management, Elsevier 135, pp: 129-147 2017
A. Dewangan Ultrasonic-assisted production of biodiesel from ManilkaraZapota (L.) seed oil. International Journal Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 39 (15), pp: 1594-1601 2017
A. Dewangan Wax deposition during production of waxy crude oil and its remediation.   International Journal Petroleum Science & Technology 35 (18), pp: 1831-1838 2017
D. B. Singh Performance analysis of basin type solar stills integrated with N identical photovoltaic thermal (PVT) compound parabolic concentrator (CPC) collectors: A comparative study International Journal Solar Energy, Elsevier 142, pp: (144-158) 2017
D. B. Singh Enhancement in energy metrics of double slope solar still by incorporating N identical PVT collectors International Journal Solar Energy, Elsevier 143, pp: 142-161 2017
D. B. Singh Energy, exergy and cost analyses of N identical evacuated tubular collectors integrated basin type solar stills: A comparative study International Journal Solar Energy, Elsevier 155, pp: 829-846 2017
D. B. Singh Analytical characteristic equation of N identical evacuated tubular collectors integrated double slope solar still International Journal Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, ASME 139 (5) 2017
D. B. Singh Exergoeconomic and enviroeconomic analyses of N identical photovoltaic thermal integrated double slope solar still International Journal Int. J. Exergy, Inderscience 148, 96-104 2017
D. B. Singh Analytical characteristic equation of N identical evacuated tubular collectors integrated single slope solar still International Journal Desalination and Water Treatment, Deswater 88, pp: 41-51 2017
M. A. Qadri Barriers to MNEs green business models in the UK construction sector: An ISM analysis International Journal Journal of Cleaner Production, Elsevier 160, pp: 27-37 2017
M. A. Qadri Green business models in the construction sector: An analysis of outcomes and benefits International Journal Construction Innovation: Information, Process, Management 18 (1), pp: 20-42 2017
V.K. Dwivedi Energy matrices evaluation and exergoeconomic analysis of series connected N partially covered (glass to glass PV module) concentratedphotovoltaic thermal collector: At constant flow rate mode International Journal Energy Conversion and Management, Elsevier 145, pp: 353-370 2017
V. K. Dwivedi Evaluating thermal performance of a basin type modified active solar still International Journal Desalination 72, 100-111 2017
P. K. Arora Determination of crack growth direction for multiple offset edge cracks of a finite plate International Journal Engineering Solid Mechanics 5, pp: 185-198 2017
P. K. Arora Monte carlo method for evaluation of uncertainty of measurement in brinell hardness scale International Journal Indian Journal of Pure & Applied Physics   55, pp: 445-453 2017
S. Kumar Assessing innovativeness of manufacturing firms using an intuitionistic fuzzy based MCDM framework International Journal Benchmarking: an
International Journal		 26 (6), pp: 1823-1844 2018
D. B. Singh Development of characteristic equations for PVT-CPC integrated self-sustainable active solar distillation system International Journal Desalination 445, pp: 266-279 2018
A. K. Yadav, A. Dewangan et al. Synthesis and Stability Study of Biodiesel from Kachnar Seed Oil International Journal Journal of Energy Engineering. American
Society of Civil Engineers		 144 (5), pp: 253-260 2018
A. Dewangan Current scenario of biodiesel development in India: prospects and challenges International Journal Energy Sources,
Part A: Recovery,
Utilization, and
Environmental
Effects		 40(20), pp: 2494-2501 2018
A. K. Yadav, A. Dewangan et al. Effect of n- Butanol and Diethyl Ether on Performance and Emission Characteristics of a Diesel Engine Fuelled with Diesel-Pongamia Biodiesel Blend International Journal Journal of Energy Engineering. American
Society of Civil Engineers		 144 (6) 2018
D. B. Singh, A. K. Singh et al. Energy metrics and efficiency analysis of solar distiller unit: A review International Journal Solar Energy, Elsevier 173, pp: 53-75 2018
P. K. Arora Progressive damage response and crack growth direction for multiple through cracks of
laminated composite finite plate 		International Journal Engineering Solid Mechanics 6 (4), pp: 371-389 2018
D. B. Singh Energy metrics analysis of N identical evacuated tubular collectors integrated double slope solar still International Journal Desalination, Elsevier 148, pp: 546-560 2018
D. B. Singh Improving the performance of single slope solar still by including N identical PVT collectors International Journal Applied Thermal Engineering, Elsevier 131, pp: 167-179 2018
D. B. Singh Energy metrics analysis of N identical evacuated tubular collectors integrated single slope solar still International Journal Energy, Elsevier 148, pp: 546-560 2018
D. B. Singh Enhancement in exergoeconomic and enviroeconomic parameters for single slope solar still by incorporating N identical partially covered PVT collectors International Journal Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, ASME 140 (5) 2018
A. K. Singh, D.B. Singh, et al. Energy matrices and efficiency analyses of solar distiller units: A review International Journal Solar Energy 173, pp: 53-75 2018
P. K. Arora, M. K. Lohumi, et al. Determination of Fracture Parameters for Multiple Cracks of Laminated Composite Finite Plate International Journal Applied Composite Materials 25 (2), pp:
381-398		 2018
V. S. Gupta, D. B. Singh,  et al. Development of characteristic equations for PVT-CPC active solar distillation system International Journal Desalination 445, pp: 266-279 2018
V. Singh, et al. Finite Difference Analysis of Plane Couette Flow using MATLAB” accepted for publication in the ‘Journal of Microcontroller Engineering and Applications National Journal Journal of Microcontroller Engineering and Applications 5(3) 2018
A. Dewangan, AK Yadav, et al. Comparative Study of ManilkaraZapota and Karanja based Biodiesel Properties and Its Effect on Diesel Engine Characteristics International Journal Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 146-164 2019
D. B. Singh, Haridwar Prasad et al. Sensitivity analysis of N identical partially covered (50%) PVT compound parabolic concentrator collectors integrated double slope solar distiller unit International Journal Desalination and Water Treatment, DESWATER 153, pp: 54-64 2019
D. B. Singh, A. K. Singh, et al. Performance analysis of specially designed single basin passive solar distillers incorporated with novel solar desalting stills: A review International Journal Solar Energy, Elsevier 185, pp: 146-164 2019
D. B. Singh Exergo-economic, enviro-economic and productivity analyses of N identical evacuated tubular collectors integrated double slope solar still International Journal Applied Thermal Engineering 148, pp: 96-104 2019
D. B. Singh Effect of depth of water on various efficiencies and productivity of N identical partially covered PVT collectors incorporated single slope solar distiller unit International Journal Desalination and Water Treatment, DESWATER 138, pp: 99-112 2019
A. Dewangan Optimisation of biodiesel production and engine performance from Simarouba oil in compression ignition engine International Journal Int. J. Oil, Gas and Coal Technology, 301-310 2019

List of Publications in Conference Papers

Name of Author Title of Paper Type Category Name of Conference Publication Date /Year Place
A. Yadav, S. A. Khan, et al. Various CFD models of Multiphase-Flow: A Case Study National Conference Proceedings of a National Conference on Emerging Trends in Mechanical Engineering (ETME-2011) 2011 IIMT College of Engineering, Greater Noida
A. Yadav, S. A. Khan, et al. Application of Reverse Engineering on Cad Modelling using Least Square Fitting Technique National Conference National Conference on Emerging Trends in Mechanical Engineering (ETME-2011) 2011 IIMT College of Engineering, Greater Noida
R. Kumar, et al. Analysis of heat transfer through Circular annular fins National Conference Souvenir Magazine 2011 SKIT(RTU), Jagatpura,Iaipur
M.A. Qadri, A.Haleem,  et al. Identification of green purchasing practices – a survey of Indian manufacturing industry National conference National conference on Manufacturing Excellence MANFEX-2011 2011 Amity University Uttar Pradesh
M.A. Qadri, A.Haleem,  et al. Green drivers and green purchasing practices: an Indian perspective International conference 12th annual International Business Research Conference 2012 University of North Florida - University of Warsaw
M.A. Qadri, A.Haleem,  et al. Barriers to green supply chain management practices: a literature review International conference International conference on Manufacturing Excellence MANFEX-2012 2012 Amity University Uttar Pradesh
M.A.Qadri, A.Haleem, et al. Quantification of critical success factors of Total quality management principles: An application of Fourier Series Analysis International conference Twelfth Global Conference on Flexible Systems Management Theme: Systemic Flexibility and Business Agility 2012 University of Vienna, Austria
M.A.Qadri, A.Haleem, et al. Identification and analysis of critical factors of KM in project management: An interpretive structural modelling approach International conference Sixteenth Annual international conference of The Society of Operation Management (SOM -2012) 2012 IIT Delhi, India
S. Kumar, and Y.V.S. Kumar MCDM techniques for optimization of process parameters in Powder Metallurgy International Conference International Conference PM-12 2012 Powder Metallurgy Association of India at Mumbai
S. Kumar, and Y.V.S. Kumar Techniques for assigning relative weights to process variables in Powder Metallurgy International Conference International Conference PM-12 2012 Powder Metallurgy Association of India at Mumbai
V. Sharma, M.A.Qadri, et al. Rapid prototyping -  a tool for reducing cycle time in Indian automobile industry National Conference National Conference on Advancements in Mechanical Engineering (NCAME-2013) 2013 Al-Falah School of Engineering and technology, Faridabad
S. Kumar, and Y.V.S. Kumar Fuzzy Techniques for Order Preference by Similarity to Ideal Solution’ International Conference Conference Information Technology Conference for Academia and Professionals CITCAP 2013 Sharda University
R. Kumar Presented a paper entitled ‘Six-sigma and its industrial application to management system National Conference Quality Management 2013 BBDIT Ghaziabad
R. Kumar A Review  of Quality Control and Quality Assurance National Conference Quality Management 2013 BBDIT Ghaziabad
R. Kumar Experimental investigation of Load and Speed Variation on pressure distribution of Hydrodynamic Journal Bearing National Conference National conference on Excellence in New Technology 2013 IIMT Gr.Noida
P. K. Arora, et al. Optimal Design of Cellular Manufacturing Systems International Conference Conference on Quality Management 2013 Babu Banarsi Das Institute of Technology
M.A. Qadri, et al. Statistical Analysis of Survey Data to Establish Strategies for Manufacturing Excellence National conference National Conference on Recent Advances in Mathematics and its Applications 2013 ISM Dhanbad
M.A. Qadri, et al. Rapid prototyping -  a tool for reducing cycle time in Indian automobile industry National conference National Conference on Advancements in Mechanical Engineering 2013 Al-Falah School of Engineering and technology, Faridabad
M.A. Qadri, et al. Lean Manufacturing Paradigm for Indian Manufacturing Industry International conference International conference on Manufacturing Excellence MANFEX-2013 2013 Amity University Uttar Pradesh,
M.A. Qadri, et al. Enablers and barriers to KM in project based-organization International conference international conference on rural innovation, capacity building, knowledge management, entrepreneurship and technology (ICRICKET) 2013 IMT, Ghaziabad, India, at India Habitat Centre, New Delhi
B. Verma Process Variables Optimization for Dimensional Accuracy of Small Size G.I. Castings Produced by V-Process National Conference National Conference, IPRoMM- 2014 2014  
B. Verma Process Variables Optimization for Surface Finish of Small Size G.I. Castings Produced by V-Process International Conference International Conference on “Energy Technology, Power Engineering & Environmental Sustainability 2014 Jawaharlal Nehru University, New Delhi
A. Kumar, A Nirala, N. Ahamad Wear behaviour of friction stir weld joint of cast aluminium alloy International conference International conference on Technological and Management Advances in the new age Economy 2014 , Mangalmay institution, Greater Noida , India
A. Nirala, et al. Fabrication and characterization of mild steel specimen using GMAW process International conference International conference on Technological and Management Advances in the new age Economy 2014 Mangalmay institution, Greater Noida , India
A. Kumar, A Nirala, N. Ahamad, et al. Effect of sintering atmosphere on Mechanical Properties of 434L Ferritic stainless steel International conference ”, International conference on Technological and Management Advances in the new age Economy 2014 Mangalmay institution , Greater Noida, India
R. Kant, et al. Application of decision making techniques in energy system – A review National Conference All India seminar on advances in engineering and technology for sustainable development 2015 G.B. Pant University of Agriculture and Technology,
R. Kant, et al. Modelling of combustion system using graph theory and matrix method National Conference National conference on interdisciplinary research in science & techionology 2015 Lingaya’s institure of technology and management, Faridabad
D. K. Das, L. K. Mahato, et al. Steady Flow Past a Rotating Circular Cylinder at Low and Intermediate Reynolds Numbers International Conference proceeding of 60th Indian Society of Theoretical and Applied Mechanics International Conference held at MNIT 2015 Jaipur
M. A. Qadri, et al. Overcoming barriers to the implementation of green business models in the construction sector International conference 4th International Conference on Multinational Enterprises and Sustainable Development MESD 15 2015 Lisbon
A. Sharma, A. Yadav, et al. Theoretical Analysis of SSC of Fin Type Hybrid PV Panel’s In-Built Heat Extraction Mechanism for maintaining its Electrical Efficiency International conference International Conference and Exhibition on Cutting Edge technological challenges in Mechanical engineering, CETCME 2015  
S. A. Khan and H. kumar Design Study for Cutting Force Measuring Dynamometer International Conference 9th International Conference on Advances in Metrology 2016 CSIR - NPL India, New Delhi
P. K. Arora, S. A. Khan, Harish Kumar Designing of Virtual Manufacturing System: A Review International Conference India International Science Festival 2016 CSIR - NPL India, New Delhi
P. K. Arora, et al. Optimization of Turning Parameters Using Taguchi Method International Conference India International Science Festival 2016 New Delhi
Ozair, et al. Optimization of Humidification process using Vetiver material in Direct Evaporative Cooling by Taguchi Method International Conference International Conference and Exhibition on Building Utilities 2016 Jamia Millia Islamia, New Delhi
Eram, et al. Multifinger Robotic Grippers-A Review, International Conference International Conference on Sustainable Development through Research in Engineering and Management (SDREM-2016) 2016 YMCA University of Science and Technology
Eram, et al. Introduction to Trajectory Planning for Serial Manipulators, presented at International Conference on Tools International Conference Techniques and Practices (TTPSM-16) 2016 GLA University, Mathura
V. Singh, S. Yadav, et al. A Terse Review of Strain Gauge Type Pressure Transducers International Conference 9th International Conference on “Advances in Metrology 2016 NPL, New Delhi
S. Kumar, Y. Shrivastava, et al. Chatter detection and quantification using hybrid computational approach International Conference 6th International & 27th All India Manufacturing Technology 2016 College of Engineering, Pune, Maharashtra, India.
Shrivastava, Y. and Singh, B. Simulation and Analysis of Tool Chatter in Turning Operation International Conference Sixth International Congress on Computational Mechanics and Simulation 2016 IIT Bombay.
Eram et al. Solar Robotic System: A Review International Conference International Conference and Exhibition on Building Utilities (ICEBU-16) 2017 Jamia Millia Islamia, New Delhi
Shrivastava,  et al. Application of EEMD in determining tool chatter behavior using ANN approach International Conference 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-2017) 2017 Indian Institute of Technology Madras, Chennai
Y. Shrivastava,  et al. Chatter analysis in turning using ensemble empirical mode decomposition International Conference International Conference on Manufacturing Technology and Simulation, (ICMTS) 2017 IIT Madras
D. Yadav, et al. Experimental Investigation on Viscosity of the Nanofluids with Different Parameters International Conference International Conference on Advances in Thermal System, Materials and Design Engineering (ATSMDE) 2017 2017 VJTI Mumbai, India
A. Dewangan, A.K.Yadav, et al.   CFD Analysis of Heat Transfer in Helical Coil Heat Exchanger International conference International Conference on Computational and Experimental Methods in Mechanical Engineering 2017 Greater Noida
V.K Dwivedi, S. Sharma, et al. Performance Analysis of Vapour Compression Refrigeration System with Different Expansion Devices International conference CETCME-2017 2017 NIET, Gr. Noida
V.K Dwivedi, S. Sharma et al. Genetic Algorithm: Review and Application International conference International Conference, on Computational and Experimental Methods in Mechanical Engg. 2017 G.L. Bajaj, Gr. Noida
H. Kumar and P.K.Arora, Implications of 3D printing in supply chain management International Conference International Conference on Advanced Production And Industrial Engineering 2018 Delhi Technological University
Eram, et al. Design Issues In Multi-Finger Robotic Hands: An Overview International Conference International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018) 2018 Amity University, Noida
D.Yadav, et al. Experimental Investigation on The Rheological Property of MWCNT-Al2O3/water Hybrid Nanofluid International Conference THERMOPHYSICS 2018, AIP Conference Proceedings 1988 2018 Smolenice, Slovakia
A. Dewangan, and A.K. Yadav, et al. Properties and Characterization of Conventional and Alternative Aviation Fuels: A Review International conference International Conference of Advance Research and Innovation 2018 Institute of Engineers, Delhi.
A. Nirala, N. Kuma, et al. Computational Fluid Dyanamics Modelleing of Two Phase Flow International conference International conference on New Frontiers in Engineering, Science and Technology (NFEST-2018), 2018 New Delhi, India
P. K. Arora, and S. A. khan, et al. Recent Development in Virtual Cellular Manufacturing System National Conference National Conference on Advancement in Mechanical Engineering (NCAME – 2019) 2019   National Institute of Technology Delhi.
P. K. Arora,et al. Optimization of Process Parameter in Electric Discharge Machining for SS420 Using Taguchi Technique International Conference International Conference on Emerging Trends in Electro Mechanical Technologies and Management 2019 New Delhi
D. Yadav, et al. Scaling Analysis of Nanofluid Flowing Inside a Circular Micro Channel International Conference Heat and Mass Transfer Conference (IHMTC-2019) 2019 IIT Roorkee, Roorkee, India
D. Yadav, et al. Heat pipe fabrication and performance evaluation for different coolants International Conference International Conference on Mechanical and Energy Technologies 2019 GCET Greater Noida Uttar Prasdesh India.
D. Yadav, et al. Comprehensive analysis over dual pass trio tube heat exchanger: An experimental study International Conference Heat and Mass Transfer Conference (IHMTC-2019) 2019 IIT Roorkee, Roorkee, India
D. Yadav, et al. Analysis over trio tube with dual thermal communication surface heat exchanger [T.T.H.Xr.] International Conference ICIME 2019
Springer (Scopus) titled “Recent trends in Mechanical Engineering” 		2019 Hyderabad
  B. Verma,  et al. Performance and Emission Characteristics of Combined biodiesel Blend of Non Edible oil in Diesel Engine International Conference IOP Conference Series - Material Science and Engineering" at ICCEMME-2019 2019  
B. Verma,  et al. Study of Performance and Emission Characteristics of Non Edible Biodiesel as a Sustainable fuel in Diesel Engine International Conference IOP Conference Series - Material Science and Engineering ICCEMME-2019 2019  
A. Dewangan, , A.K.Yadav, et al. Effect of Operating Parameters on Performance and Emission Characteristics of a Bio-Diesel Fuelled Engine A Review. National conference National Conference on Fluid and Thermal Energy Conversion 2019 Raj Kumar Goel Institute of Technology
M.A.Qadri, et al. Analysis of Firm Level Innovativeness National conference NCAME 2019 2019 NIT Delhi
S. Sharma, Dwivedi, et al. Analysis of Double-stage Thermoelectric Refrigerator National Conference Advances in Mechanical Engg 2019 N.I.T. Delhi

List of Publications in Journals (2016- 2017)

  1. Abuzeinab, A., Arif, M. and Qadri, M.A. (2017) Barriers to MNEs green business models in the UK construction sector: An ISM analysis, Journal of Cleaner Production, Vol. 160, 27-37.
  2. Abuzeinab, A., Arif, M. and Qadri, M.A. (2017) Green business models in the construction sector: An analysis of outcomes and benefits, accepted for publication in Construction Innovation: Information, Process, Management (CI-07-2016-0041.R2).
  3. Singh, D.B. and Tiwari, G.N, (2017) Exergoeconomic, enviroeconomic and productivity analyses of basin type solar stills by incorporating N identical PVT compound parabolic concentrator collectors: A comparative study, Energy Conversion and Management, Vol. 135, pp. 129–147.
  4. Singh, D.B. and Tiwari, G.N., (2017), Performance analysis of basin type solar stills integrated with N identical photovoltaic thermal (PVT) compound parabolic concentrator (CPC) collectors: A comparative study, Solar Energy, Vol. 142, pp. 144–158.
  5. Singh, D.B. and Tiwari, G.N., (2017), Enhancement in energy metrics of double slope solar still by incorporating N identical PVT collectors, Solar Energy, Vol. 143, pp. 142–161.
  6. Sandeep, Sudhir Kumar and V.K.Dwivedi, (2017), Evaluating thermal performance of a basin type modified active solar still, Desalination and Water Treatment, 72, 100–111.
  7. Rohit Tripathi, G.N.Tripathi and V.K.Dwivedi, (2017), Energy matrices evaluation and exergoeconomic analysis of series connected N partially covered (glass to glass PV module) concentrated photovoltaic thermal collector: At constant flow rate mode, Energy Conversion and Management 145, 353–370.

List of Publications in Journals (2015- 2016)

  1. Rohit Tripathi, G.N.Tripathi and V.K.Dwivedi (2016), Overall energy, exergy and carbon credit analysis of N partially covered Photovoltaic Thermal (PVT) concentrating collector connected in series, Solar Energy 136, 260–267.
  2. Singh, D.B. and Tiwari, G.N., (2016), Effect of energy matrices on life cycle cost analysis of partially covered photovoltaic compound parabolic concentrator collector active solar distillation system, Desalination, Vol. 397, pp. 75–91.
  3. Singh, D.B., Yadav, J.K. , Dwivedi, V.K., Kumar , S., Tiwari, G.N. and Al-Helal , I.M, (2016), Experimental studies of active solar still integrated with two hybrid PVT collectors, Solar Energy, Vol. 130, pp. 207–223.
  4. Singh, D.B., Tiwari, G.N., Al-Helal , I.M., Dwivedi, V.K and Yadav, J.K. (2016), Effect of energy matrices on life cycle cost analysis of passive solar stills, Solar Energy, Vol. 134, pp.9–22.
  5. Tiwari, G.N., Yadav, J.K., Singh, D.B., Al-Helal, I.M. and Abdel-Ghany, A.M.,(2015) Exergoeconomic and enviroeconomic analyses of partially covered photovoltaic flat plate collector active solar distillation system,Desalination, Vol. 367, pp.186–196.
  6. V. Sharma, A.R. Dixit, and M.A. Qadri, (2016), Empirical assessment of the causal relationships among lean criteria using DEMATEL method, Benchmarking: an International Journal, Vol. 23, issue 7, pp.1834-1859.
  7. V. Sharma, A.R. Dixit, and M.A. Qadri, (2016), Modeling lean implementation for manufacturing sector, Journal of Modeling and Management, Vol. 11, Issue 2, pp. 405-426.
  8. Amit K. Srivastava, P.K. Arora and Harish Kumar. (2016) Numerical and experiment fracture modeling for multiple cracks of a finite aluminum plate, International Journal of Mechanical Sciences 110, pp. 1-13
  9. Harish Kumar, Chitra Sharma, P.K. Arora, Girija Moona and Anil Kumar, (2016), Development and metrological characterization of a precision force transducer for static force measurement related applications, Measurement 88.
  10. Arora, P K, Haleem, Abid and Singh, M K.. (2016), Design of a Production System Using Simulating Annealing Technique, Productivity, Vol. 56, No.4, pp. 362-367.
  11. V. Sharma, A.R. Dixit, M.A. Qadri and S. Kumar, (2015), An Interpretive hierarchical model for lean implementation in machine tool sector, International Journal of Productivity and Quality Management, Vol. 15, No. 3, pp-381-.406.
  12. V. Sharma, A.R. Dixit, and M.A. Qadri, (2015), Impact of lean practices on performance measures in context to Indian machine tool industry, Journal of manufacturing and technology management, Vol. 26, issue 8, pp. 1218-1242.
  13. Kalyan Kumar Singh, Saurabh Singh, and Anil Kumar Shrivastava, (2016), Study of Tribological Behavior of Silicon Carbide Based Aluminum Metal Matrix Composites under Dry and Lubricated Environment, Advances in Materials Science and Engineering Volume, 1-11

List of Publications in Journals (2014-15)

  1. M. K. Lohumi, Aas Mohammad and I. A. Khan (2015), A computerized loop based approach for identification of isomorphism and type of mobility in planar kinematic chains, Sadhana, Indian Academy of Sciences, Volume 40, Issue 2, pp 335-350.
  2. S. Sharma, V. K. Dwivedi and S. N. Pandit, (2014) A review of thermoelectric devices for cooling applications, International Journal of Green Energy, Vol.11, pp. 899-909.
  3. S. Sharma, V. K. Dwivedi and S. N. Pandit (2014), Exergy analysis of single stage and multi stage thermoelectric coolers, International Journal of Energy Research, Vol.28, pp. 213-222.
  4. S. Sharma, V. K. Dwivedi and S. N. Pandit, (2014), Thermoeconomic analysis of multi stage thermoelectric cooler, International Journal of Thermal and Environmental Engineering, Vol.08 (02), pp. 77-82
  5. S. Luthra, M. A. Qadri, D. Garg and A. Haleem, (2014) Identification of critical success factors to achieve high green supply chain management performances in Indian automobile industry, International Journal of Logistic System and Management, Vol. 18, No. 2, pp. 170-199.
  6. V. Sharma, A.R. Dixit and M. A. Qadri, (2014), Analysis of barriers to lean implementation in machine tool sector, International Journal of Lean Thinking, Vol. 5, No. 1, pp. 1-25.
  7. P.K.Arora, A.Haleem, M.K. Singh, H.Kumar and M.Kaushik, (2014), Design of production System Using Genetic Algorithm, Procedia Technology, Vol.14, pp.390-396.
  8. A.K. Sethi, and V.K. Dwivedi (2014), Carbon credits earned from a double slope active solar still under forced circulation mode, International Journal Renewable Energy Technology, Vol. 5, No. 4, pp. 363-371.
  9. A.K. Sethi, and V.K. Dwivedi, (2014), Development and life cycle analysis of double slope active solar still with flat plate collector, Journal of Engineering Science and Technology Review 7.1, pp. 164-169.
  10. Singh, B., Singh, A. and Yadav, R.C. (2014) Information technology tools: key to improve the performance of small manufacturing sectors of India, International Journal of Emerging Research in Management and Technology, Vol. 3, No. 1, pp. 21-29.
  11. Singh, B., Singh, A. and Yadav, R.C.(2014), Reluctant workforce may derail the adoption of Advance Manufacturing Technology (AMT) in Micro, Small and Medium Enterprises (MSMEs) of India, Global Journal of Enterprise Information System, Vol. 6, No. 2, pp. 01-14.
  12. Singh, B., Singh, A. and Yadav, R. C.(2014) Adoption of Advance Manufacturing Technologies in Small Manufacturing Sectors of India: An integrated Planning Model, International Journal of Mechanical and Manufacturing Technology, Vol. 3, Issue 1, pp. 196-206.

List of Publications in International / National Conferences (2016-17)

  1. P K Arora, Manohar Singh and Harish Kumar (2016), Optimization of Turning Parameters Using Taguchi Method, India International Science Festival, CSIR-NPL New Delhi, 8-11 Dec 2016
  2. P K Arora, S.A.Khan and Harish Kumar, Designing of Virtual Manufacturing System: A Review, India International Science Festival, CSIR-NPL New Delhi, 8-11 Dec 2016, IIT Delhi
  3. Singh D. B. and Yadav J. K., Energy and exergy analyses of double slope solar still incorporated with N identical flat plate collectors, National Conference on Renewable Energy Sources for Sustainable Climate, SOLARIS, IIT Delhi 7-9 February, 2017.
  4. Yadav J. K., Singh D. B., Dubey A. and Singh D., Energy and exergy analyses of single slope solar still incorporated with two identical PVT collectors: An experimental study, National Conference on Renewable Energy Sources for Sustainable Climate, SOLARIS, IIT Delhi 7-9 February, 2017.
  5. Rohit Tripathi, G.N.Tripathi and V.K.Dwivedi, Overall Energy and Exergy Performance of Partially Covered N-Photovoltaic Thermal (PVT)-compound Parabolic Concentrator (CPC) Collectors Connected in Series, 1st IEEE International Conference on Power Electronics. Intelligent Control and Energy Systems (ICPEICES-2016).
  6. Sumit Tiwari, V.K.Dwivedi, Rohit Tripathi and G.N.Tripathi, Energy Analysis of Photovoltaic-Thermal (PVT) Greenhouse Under Forced Mode without Load Condition., 2nd international conference on Innovative Applications of Computational Intelligence on Power, Energy and Controls with their Impact on Humanity (CIPECH-16) in IEEE international conference, November 18-19, 2016, KIET Ghaziabad.
  7. Sudhanshu Sharma and V.K. Dwivedi, Performance Analysis of Vapour Compression Refrigeration system with Different Expansion Devices, 2nd International conference CETCME-2017 during February 18-19th 2017 at NIET Greater Noida.
  8. V. K. Dwivedi, Effect of PV area on energy and exergy of single slope solar still incorporated with N identical flat plate collectors, National Conference on Renewable Energy Sources for Sustainable Climate held in IIT BHU Varanasi, February 07-09, 2017 (SOLARIS 2017).
  9. V. K. Dwivedi, Effect of PV area on the performance of flat plate air collector integrated GSD, National Conference on Renewable Energy Sources for Sustainable Climate held in IIT BHU Varanasi, February 07-09, 2017 (SOLARIS 2017).

List of Publications in International / National Conferences (2015-16)

Books / Book Chapters

  1. Kalyan Kumar Singh, Saurabh Singh and Anil Kumar Shrivastava, Comparison of Wear and Friction Behavior of Aluminum Matrix Alloy (Al 7075) and Silicon Carbide based Aluminum Metal Matrix Composite under Dry Condition at Different Sliding Distance, International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016).
  2. V.K. Dwivedi and Manoj Gaur, Performance analysis of a single basin double slope passive solar still, National Conference on "Energy and Environment: Threat and Remedies in Rustamji Institute of Technology, BSF Academy, Tekanpur Gwaliar (MP) held on May 5-6, 2016
  3. V.K.Dwivedi, Prabhakar Tiwari and Sumit Tiwari, Importance of phase change material (PCM) in Solar Thermal Applications, A Review. International Conference on Emerging Trends in Electrical, Electronics & Sustainable Energy Systems (ICETEESES-16), KNIT, Sultanpur, February 11-12, 2016

List of Publications in International / National Conferences (2014-15)

  1. G.N. Tiwari, Sumit Tiwari, V. K. Dwivedi, Sanjeev Sharma and Vineet Tiwari, Effect of Water Flow on PV, IEEE International Conference on Energy, Economics and Environment (ICEEE2015). Galgotia College of Engineering and Technology, Greater Noida, 27-28 March, 2015.Module: A Case Study.

Books / Book Chapters

  1. Singh D. B., Passive and Active Solar Distillation, CRC Handbook of Thermal Engineering, Second Edition", Taylor and Francis Group, UK (in press)
  2. P.K.Arora, A. Haleem, M.K. Singh, H. Kumar and D.P.Singh, Optimal Design of a Production System , CAD/CAM, Robotics and Factories of the Future, Publisher: Springer
  3. H.Kumar, P.K.Arora, GirijaMoona, D.P. Singh, Jasveer Singh and Anil Kumar, A Retrospective Investigation of Different Uncertainty of Measurement Estimation Approaches, CAD/CAM, Robotics and Factories of the Future, Publisher: Springer

Academics

Updates

  • Department of Applied Science is organizing an International Conference on Innovation and Application in Science & Technology (ICIAST-2021) during December 21-23, 2021. Conference Website:https://iciast.in/
  • B.Tech. Program of "Mechanical Engineering" and "Electronics & Communication Engineering" is further accredited by NBA till 2023-2024 session (30-06-2024).

Recruiters

  • Indian Navy TCS Infosys Wipro Technologies Interglobe Technologies Hero Motocorp
  • Bhilwara Infotech Ltd. Ashok Layland Optra Automation Pvt. Ltd. Perfect Generators Chegg India IP Neeti
  • Thots Labs Naukri.com Jet Airways Radical Minds Technologies Tanisha Systems Future Supply Chain Solutions Ltd
  • Ingenious e-Brain Solutions TransWeb Educational Services Pvt Ltd Research Nester Amazon Shahi Exports Pvt. Ltd. Emerson Automation Solutions
  • Juspay Pioneer-e-Solutions Namekart Eastman Mettcast Ltd. Dhampur Sugar Mills Ltd Jaipur Mahua Tollway Pvt. Ltd.
  • edWisor Classplus RGF Trishul Realcon Pvt. Ltd. Multiplier Solutions HSBC Software Development (India) Pvt. Ltd.
  • Ebizon Netinfo Pvt Ltd Sharda Motor WSP Consultants India Pvt. Ltd AKGEM Impex Pvt. Ltd. Grenovators Motor Work Pvt Ltd  Vedicsoft Solutions India Pvt. Ltd.
  • Novelvox Al Futtaim Carillion (Dubai, UAE) - Emrill Real Time Data Services Zep Infratech Ltd Paharpur Sopra Steria
  • JINDAL BUILDSYS LTD.  Oriental Structural Engineers Pvt Ltd Polestar Solutions & Services Ind. Pvt Ltd Trident Techlabs Pvt Ltd Industry Buying MPS Ltd.
  • Premier Edge Solutions pvt. ltd GiGlue Music Private Limited TPS Infrastructure Ltd. Vikas Group CNH Industrial (I) Pvt. Ltd. WhizChip Design Technologies Pvt Ltd
  • Kriti Digitech Pvt Ltd Cognizant Kriti Group Fedex Success Mantra Imperial Society
  • Emtex Manufacturing Mahindra & Mahindra Ltd. PPAP Automotive Limited Cube Highways

Helpline No

1, Knowledge Park-II, Greater Noida, Uttar Pradesh, India

+91-7303382061, +91-7303382063, 0120-4513800

admissions@galgotiacollege.edu

Quick Access

 

 

© Copyright 2018, all rights reserved with Galgotia College